1. »
  2. Product
  3. »
  4. Special equipment
  5. » Tractor 200-02M with forestry mulcher

Tractor 200-02M with forestry mulcher


Wheel scheme:4х4

Engine model:Д-260.4

Engine manufacturer:Minsk Motor Plant

Number and arrangement of cylinders:6, row

Working volume, l:7,12

Rated power, kW (hp):154,4 (210)

Maximum torque N×m (kgf×m):808 (82,3)

Specific fuel consumption at operating power, g/kW×h (g/hp×h): 154,4 (210)

Rotation frequency, rpm:2100

Clutch:dry single disc "LuK" (Germany)

Transmission:mechanical with hydraulic shifting on the go without interrupting the flow of power with the "quick reverse" function

Number of forward/reverse gears: 12/4

Travel speeds, forward travel, km/h:0.5-44.20

Travel speeds, reverse, km/h:0.6-18.60

Front power take-off shaft (option) and speed, rpm: independent, two-speed, 540 or 1000

Traction effort, maximum, kgf:6000

Attachment, rear:option, carrying capacity up to 4000 kg

Attachment, front (option):two-cylinder, with a load capacity of up to 6000 kg


Operating weight, kg:8525

Overall dimensions in transport position, not more than, mm:6130x2460x3300

Attachment hydraulic system:pump type: gear, performance, l / min: 90, working pressure, bar: 160

The tractor is designed to work with energy-intensive attachments attached to the front (shredders, mulchers, brush cutters, rotary snow plows, cutters, equipment for removing stumps, etc.), it can be equipped with a towbar for towing a trailer. For the convenience and safety of the operator, the engine of the XTA-200-02M tractor is located behind the tractor cabin, which is additionally equipped with protective devices (protective grilles and nets, etc.).

The load capacity of the attached device on the axle of the suspension is 6 tons.

To ensure stable operation, a GDP reducer with an oil cooling and filtering system, reinforced with a hydraulic clutch, is installed. Tractor frame with a reinforced 3-finger vertical joint connecting the poles. Cabin with air conditioner and audio system.

Forestry shredder (forestry) ECF / DT 200 (Italy).
Designed for chopping trees, shrubs, stumps and branches.
The maximum diameter of the grinding barrel is 30 cm, the working width of the equipment is 200 cm, the diameter of the rotor is 520 mm, the frequency of rotation of the rotor is 2000 rpm, the drive of the rotor is two-way, the hammers rotate - 36 pcs., the reducer with an overrunning clutch. Overall dimensions 2.50 x 1.30 x 1.05. Weight 2100-2450 kg (depending on the configuration).

Общество с ограниченной ответственностью БАВАРИЯ АГРО Код ЕГРПОУ 39875256

36008, г. Полтава, ул. Комарова, 7

Общество с ограниченной ответственностью ФОТОН-УКРАИНА Код ЕГРПОУ 35871436

02088, г. Киев, ул. Харченко, 21
Все диллеры
Do you have any questions?

Leave your information and our manager will answer all your questions